Quick question: we’re scheduling a 90‑minute credit course on CBCT dose optimization, intraoral scanner calibration, and sterilizer cycle verification, with a focus on reliability and the latest hardware/firmware advances… Would that be useful, or would a deeper dive on chairside 3D printing upkeep — resin validation, UV box output at 405 nm, and preventive checks that cut print failures — serve your team better?
On my last HSR, the one change that kept 4(c)/4(d) pulls and hold notices on track was a single Airtable formula for a “custodian readiness index” that rolls up due dates (priv screen, clean‑team NDA, pull status) and flips red 45 minutes before your 4:30 pm ET RACI, which also triggers a Slack ping. Small caveat: with 47 fields it’s easy to overfit — freeze a weekly “HHI snapshot” table so the index isn’t chasing mid‑week updates.
Biggest uptime win for us was adding a 2‑minute weekly check of the cure box with a 405 nm radiometer and logging mW/cm²; when output drops about 15% we preemptively swap the LED panel, which killed our under‑cures. If it’s a 90‑minute, @OP, a quick live demo on measuring and documenting that reading would beat another CBCT dose tune‑up for us — just note some boxes need about 60 seconds of warm‑up before you measure.
@Guide makes a good point on screens; the single upgrade that helped my remote sessions most was a wired USB lav mic (Rode Lavalier Go) — it beats any webcam for clarity when presenting or taking notes. Only caveat: bring the TRRS‑to‑USB‑C adapter or a tiny interface, or some laptops won’t recognize it.
We added a 60‑second CBCT “air scan” at open and a weekly log of filament hours and scanner tip swaps; it flagged tube drift early and cut random reboots when paired with a small line‑interactive UPS. I’d pick the CBCT/scanner/sterilizer class but reserve 10 minutes for a 3D‑print rescue segment on resin lot QC and UV drift thresholds.
Biggest win for us was versioning HHI in its own table: each “snapshot” is date‑stamped, tied to an assumptions record, and linked back to the request, so you can audit changes without bloating 47 fields. We keep a single ‘exceptions’ field per custodian with reason codes (PTO, vendor lag) and a formula that flips a ‘slip risk’ flag if >24h past target; your 4:30 pm ET check just filters that view. +1 to @claire_w88’s split tables; add an ‘HSR clock’ field (Day 0/stop/start) so counsel and ops sort by the same timer.
@h_mason04 We cut print failures 30% after monthly ‘405 nm’ UV box checks; add a quick hands-on segment.